General Specifications:

• Blade Diameter: 10 inches
• Power: Typically around 15 amps (varies by manufacturer)
• Motor Speed: Usually around 5000 RPM (rotations per minute)
• Bevel Range: 0° to 45° (left or both directions depending on the model)
• Mitre Range: 0° to 45° (left and right)
• Cutting Capacity:
  • 90° crosscut: Usually about 3″ x 12″ (varies by model)
  • 45° mitre cut: Around 3″ x 8″ (varies by model)
  • 45° bevel cut: Around 2″ x 12″ (varies by model)

Features:

1. Laser Guide System: For precise cutting.
2. Adjustable Bevel and Mitre Angles: Allows for compound cuts.
3. Dust Collection System: Helps keep the work area clean.
4. Sliding Feature: Increases the cutting capacity.
5. Positive Stops: At common angles for quick settings.

Typical Applications:

• Woodworking: For precise crosscuts, mitre cuts, bevel cuts, and compound cuts.
• Construction: Commonly used for cutting framing lumber, molding, and trim.
• DIY Projects: Ideal for home improvement projects that require precision cutting.

Safety Tips:

1. Wear Safety Gear: Safety goggles, hearing protection, and dust mask.
2. Secure the Workpiece: Ensure the material is firmly clamped before cutting.
3. Use the Guard: Keep the blade guard in place.
4. Inspect the Blade: Regularly check for sharpness and damage.
5. Follow Manufacturer Instructions: Always refer to the user manual for proper operation and maintenance.

Maintenance Tips:

• Clean Regularly: Remove dust and debris after each use.
• Lubricate Moving Parts: Ensure smooth operation.
• Check Blade Alignment: For accurate cutting.
• Replace Worn Parts: Such as blades and brushes.